Waveguide Bend

Waveguide bends find numerous applications in microwave and satellite communications. Channeling of signals between different components in systems is achieved by using waveguide bends.

At MEGA INDUSTRIES, we use the most advanced methods of fabrication in creating all of our waveguide bends, be it waveguide sweep bends or waveguide miter bends.

Waveguide Sweep Bends

Waveguide Bend, Waveguide Sweep Bend, Waveguide Miter Bend, Aluminum, Copper, Brass, Stainless, Steel, Invar, Microwave, Satellite Communication, Fabrication, Microwave Transmission Equipment, Gorham, Maine, ME.

Mega Industries utilizes the most advanced fabricating methods for the forming of precision waveguide sweep bends. Strict adherence to EIA dimensional tolerances insures a minimum reflection coefficient over the waveguide band. Typical VSWR is 1.05:1

Standard material used is 6061-T6 Aluminum; however these can also be supplied in Copper, Brass, Stainless Steel, and Invar.

The radii listed below are the recommended dimensions for 90° bends; however, other radii and angles can be readily supplied to minimize system design costs. Units are available for both high pressure and high vacuum applications.

Pieces are available in full height (2:1 ratio) as well as reduced height configurations. Please call with any questions regarding our waveguide sweep bends.

Waveguide Sweep Bends
Product Data Sheet

Waveguide Miter Bends

Mega Industries high quality 90° waveguide miter bends are of minimum physical size and provide superior electrical performance over a restricted bandwidth (typically VSWR 1.02:1 over a 10% bandwidth).

Standard material used in manufacturing our waveguide miter bends is 6061-T6 Aluminum; however these can also be supplied in Copper, Brass, Stainless Steel, and Invar.

Angles other than 90°, alignment pins, grooved flanges and various aspect ratios can readily be fabricated to meet your feed system requirements. Units are also available for both high pressure and high vacuum applications.

Waveguide Miter Bends
Product Data Sheet

Waveguide Bend

Waveguide Sweep Bends

Waveguide Miter Bends

Waveguide Bend, Waveguide Sweep Bend, Microwave, Satellite Communication, Fabrication, Waveguide Miter Bend, Aluminum, Copper, Brass, Stainless Steel, Invar, Alignment Pins, Grooved Flange, Microwave Technology, Microwave Transmission, Gorham, Maine, ME.